3.1 Signal Generator Language Setting
Set a language of the display by pressing MENU – [System] – [Language] on the front panel.
Default: English
3.2 Signal Generator Front Panel Operation
3.2.1 Signal Generator Function Keys
| NO. | Function | Description |
| 1 | RESET | Revert to the default parameters. |
| 2 | MENU | Select and set functions. |
| 3 | RF ON/OFF | RF signal output switch. |
| 4 | Power Button | Set power-on state or stand-by state. |
3.2.2 Signal Generator Touch Screen Display
| Area | Function | Description |
| A | Set Power | Touch this area to set power.Display the current power level and reference status. |
| B | Set Frequency | Touch this area to set frequency.Display the current frequency, RF output status, modulation on/off status and sweep on/off status. |
| C | Modulation Switch | Touch this area to switch on/off the modulation and RF signal.Display modulation on/off and RF on/off status. |
| D | Set Modulation | Touch this area to set modulation status.Display current modulation status. |
| E | Set Sweep | Touch this area to set sweep status.Display current sweep status. |
| F | Amplitude & Frequency Display | Touch this area to set power.Display current power and frequency set value. |
| G | Select Channels | Touch this area to select RF channels.Display current selected channel and its on/off status. |
3.2.3 Signal Generator Number Keyboard
| No. | Definition | Description |
| 1 | Direction Key | Up/down keys are for value increase or decrease.Left/right keys are for cursor movement and Tap. |
| 2 | Knob | Rotate the knob to change the selected value. |
| 3 | Number Keys | Insert numbers. |
| 4 | Back | Revoke the last inserted data one by one. |
| 5 | ESC | Close the current active area. |
| 6 | OK | Confirm the current set parameter. |
| 7 | FREQ | Press the button and set frequency. |
| 8 | LEVEL | Press the button and set power level. |
| 9 | Unit Keys | Insert suitable unit for the parameter. |
3.3 Signal Generator Rear panel Operation
3.3.1 Signal Generator AC Power Input Terminal
This equipment can operates with AC power from 110V – 220V, 50Hz – 60Hz. Standard IEC, fuse and 2nd switch included.
3.3.2 Digital Interface
| NO. | Interface | Description |
| 1 | 4*USB2.0 Host | Connecting to an external USB device. The interface reads the data or state file from the U disk, or stores the current instrument state/data to the U disk. |
| 2 | LAN Interface | 100Mbps LAN Interface. Connecting to a computer. The interface conducts remote control or data transmission. |
3.3.3 Testing Ports
| NO. | Ports | Description |
| 1 | PULSE IN/OUT | PULSE IN：In external modulation mode, this port is used to input external pulse signals.PULSE OUT: In internal modulation mode, this port is used to output the pulse signal generated by the internal generator. |
| 2 | TRIGGER IN | In pulse modulation, input the external trigger signal. |
| 3 | 10MHz IN | 10MHz reference input. |
| 4 | 10MHz OUT | 10MHz reference output. |
| 5 | 100MHz OUT | 100MHz reference output. |